Ebikes

Best Bike Alarm System Unboxing And Review

Thank you all for tuning in today. I appreciate you today. I would like to bring a review and unbox this anti theft alarm system that i use on my e bikes im currently using this exact model on my eb5 and im going to be using this one on my new enduro 8000 watt e bike that i have Coming in as well in this video im going to show you all, the contents were going to take a close up. Look at everything inside well, look at the performance and im going to relay my final opinions at the end of the video, for you also be sure to stick around for that. Should you have any questions at any point throughout this video im going to encourage you to drop a comment down below? I will do my best to assist you in the best possible direction. I will also leave links in the description below so you can check this out on your end. With that being said, lets dive straight on into this im, going to show you all the packaging up close here. So this is a vibration, intrusion, detector, vehicle, anti theft. Alarm pro is what it states on the front. It is rechargeable, as you can see its usb chargeable there and im going to show you all of that. Up close, it has three dimensional sense. It has a sense level center or seven level sensitivity. Forgive me, there 110 decibels waterproof dust proof again.

It is usb rechargeable and its easy installation im going to show you that as well and from my experience using this specific alarm system, it does the job. It even comes with a little remote that you can activate the alarm remotely as well, which is a plus. So thats the packaging there and upon opening it. This is what you are greeted with right here. So off the bat i do see. The alarm unit itself here is a remote. Here is a user manual. We have a charger, so lets kind of go ahead and dive into here. So taking a close up, look at the alarm itself. This is the unit right here, as you can see its a fairly small unit, so installing it on your bike is going to be very, very discreet and depending on, where you put it as well, it may not even be noticeable, but this right here is the Unit itself – and i will show you all how i installed it on my eb5 im, going to show you how it sounds as well so be sure to stick around for that hit that subscribe button. For me as im going to be bringing more videos like this. For you all – and this is where were going to recharge it – and this is where it clips on to the clip, as you can see, i think its usbc, which it also comes with in there as well.

Well get there here shortly and again. What im trying to do is im trying to put you in front of this product virtually so that way, you know what to expect on your end. This is the on and off switch and from my experience, um ive been using mine for about three months now and i havent charged it not once and i feel like i can get another three months out of it. Im gon na update you all on how this works, but, overall, from my personal experience, the battery life on this thing is outstanding. Here is the user manual right here as well. Let me show you all the contents. This is the remote control right here now it does feel a bit on the cheaper end. However, it definitely does a job if youre not going to be throwing this thing around and or dropping dropping it. I feel this thing will last you just take care of it and itll do its job here were going to take a closer look at everything in a bit. This is the charging cable and, in here it comes with, as you can see, a little tool kit. So we have a mini screwdriver, an allen key some screws there and some little rubber adapters right here for installation. It comes with some zip ties. It has a clip, the disc mount im, not sure the terminology, and it has the clip right here. So this is what we would attach or use to attach to the bike.

This attaches to this, like so, and im going to go ahead and take a look, a closer look at that with you all here, but for the contents. This is everything that is included. This is what we could expect on our end. All of the contents right here accordingly lets start with the user manual, and what im going to do is im going to show you all the pages up, close feel free to pause at any point to go ahead and thoroughly. Read everything on your in its giving us thorough instructions here on installation charging positioning for installation, i think thats subjective. You can kind of position it to your liking as everyones bikes different. This is the options for the alarm there for the remote and right here. So it gives you all the information on how to navigate how to install change different levels, what the remote is and what everything does here. Thats very, very useful, depending on your bike, is going to determine how youre going to go about installing this onto your bike and mounting it to your bike. You can use this little bracket with this adhesive and you can use the zip ties as well to stick. It to the bike and then mount it use the zip ties to go ahead and put them through here these little areas and then mount it to your bike wherever that is going to be. For me, im not going to be using that im going to be using this little bracket, and i want to use the screws that it came with to tightly secure this onto a post on the bike somewhere and then im going to use this and im.

Just going to install it straight into here, so you could either put it into this cap or this cap right here. One thing that were going to pay attention to, though, is as you can see, there is a little hole right there. So what im going to want to do is ensure that im lining that up and place it in like so clip it in, and this is a tricky part, were going to have to get the screw place it in there and screw it in so lets. Try that right now the screw is in here lets, go ahead and take these tools out right here: im going to grab this and its this little little silver screw that it came with and then im going to simply just drop it in play and screw it In there and what this is going to do, this is going to essentially mount the bracket to the alarm itself, ensuring that it doesnt go anywhere when were riding bumping up, stuff, etc, etc. Just take your time, make sure that youre not going to strip the screw and make sure that this screw is tightened in all the way and make sure that its sitting flush in there like so and once you get it screwed in there properly. This alarm system is now mounted to this bracket and then now youre ready for installation on your bike notice. It does have a little slant right here, so if you install it on the pulse this way its going to slant up, if you install it this way its going to have a slant down.

Hence this little hinge right here. This is more upwards direction straight direction. This ones more pointed down to each their own. I guess whatever will suit your needs from here. You can simply place this rubber stopper on there mount it to your post on your bike and again im going to cut to an eb5 clip here and show you how i installed it on my eb5 and then you can screw it in from here. Okay, then begin mounting it to any post youd like on your end, thats how i would go about mounting it to any bike here, thats, basically, how i would go about setting this up now to each their own, depending on your bike again, is going to determine How youre going to go about setting it up on your end, but for me this is how i would go ahead and utilize the brackets and set up here so thats how i would go about it. This would be the bike pose. This would be mounted to tighten this as much as i needed according to the bike post. So for the first two is very straightforward: the arm button disarm button really self explanatory there. This lightning icon this button right here for those who are curious, says right here. So the ringtone button select ringtone our press ringtone button, select ringtone three ringtones for your choice. We cant use it when its in arma mode but thats what this is.

So we can change the different alarm ring tones, so we have arm disarm, ringtone select, and then we also have a page button, which is the bell button allows us to call back the ev to help us locate it, and those are the functionalities right here on This remote and thats all that it gives us right there to work with. I am going to make more videos on how i go about setting this up and more about the actual functionality here, but for this video i want to stick to the unboxing and an initial review for you all. But after some experience with this specific unit, i can confidently recommend this to anyone who is looking for a good, solid, affordable alarm to protect their electric vehicle or whatever it is. They may want to install this too. Allow me to switch over to a different angle. So i can show you how i have it set up on my eb5 and i can come back and conclude the video here. Okay, so heres, where i have the alarm system installed on my ev5. As you can see, i installed it with the brackets there. Here is the remote im gon na go ahead and arm it for you all. So now the alarm is activated. So if i were to tap the seat on my eb5, it creates the warning and then hit it again, and then you hit the unlock button to disarm the alarm.

This alarm system is loud, its obnoxious. I can highly recommend it and confidently recommend this would be a great deterrent for anyone who is trying to put hands on your ev without permission highly recommend again, links will be in the description below if i didnt touch base on something specific throughout this video im. Going to encourage you to drop a comment below and im going to do my best to assist you in the best possible direction. Hit that subscribe button for me and ring that bell as im going to be bringing more videos on setting up this alarm and usability on this alarm so be sure to stick around. For that. I appreciate you all tuning in. Thank you very much.

https://www.youtube.com/watch?v=eWni1nPHufA


Source link

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button